Thermal covers KAZCOVER

TM KAZCOVER thermal insulation covers are developed directly for the task being solved

All technical solutions are discussed and approved with the customer so that the effect obtained meets the expectations as much as possible.

Only high-quality
covers and accessories

Use of high-quality materials allows TM KAZCOVER thermal covers to cover the entire temperature range from -60°С to +1200°С.
And also, to be durable, reliable and efficient.
The service life of TM KAZCOVER thermal covers is at least 10 years. Warranty and service - 2 years.

#
Foamed rubber up
to + 150°C

• Possesses low coefficient of thermal conductivity;
• High water vapor diffusion resistance coefficient;
• Increased density;
• Wide operating temperature range;
• UV resistance;
• Resistance to mechanical and chemical influences.

#
Mineral wool up
to + 600°C

• Has a low coefficient of thermal conductivity;
• Able to maintain high thermal insulation properties under various operating conditions;
• Hydrophobic, means that, it has the ability not to be wetted with water;
• Withstands exposure to high temperatures without ignition and damage to the structure and strength;
• Resistant to deformation.

#
Ceramic fiberglass up
to +1200°С

• Possesses excellent thermal-insulating and acoustic properties;
• High chemical resistance to water and high-pressure steam;
• Unaffected by most chemicals;
• Resistant to organic and mineral acids of any concentration;
•  Resistant to sudden temperature changes (thermal shock).

#
Coatings:

• F-TEX S1 - Aluminized glass fabric.
• F-TEX S3 - Polyurethane coated glass fabric.
• F-TEX S4 - Silicone coated fiberglass fabric.
• F-TEX B1 - Textured fiberglass fabric with high temperature impregnation.
• F-TEX B2 - High temperature impregnated textured fiberglass fabric reinforced with stainless steel wire.
• F-TEX K1 - Textured silica fabric reinforced with stainless steel wire.

#
Accessories:

• Rings, half rings (stainless steel, nickel-plated);
• Hook on a leg (stainless steel);
• Tape contact (velcro);
• Kevlar thread;
• Silica thread;
• Wire (stainless steel / galvanized);
• Staples for thermal insulation (stainless steel);
• Washers (stainless steel);
• Protective mesh (stainless steel).

THERMAL COVERS
FOR FITTINGS

ТМ KAZCOVER — thermal covers for the entire list of fittings.

#
Technical properties:

• Application temperature: from - 50°С to +1000°С
• Fire hazard class: KM0 / KM1
• Application: indoor / outdoor
• Thermal conductivity from 0.034 W/ms
• Insulation thickness not less than 50 mm as calculated in accordance with SP 61.13330.2012

Physical properties:

• Water and oil resistance
• Mildew proofing
• Resistance to acids and alkalis
• Excellent thermal resistance
• Decay resistance
• Abrasion resistance
• UV resistance
• Noise and sound insulation

Versions TM KAZCOVER

of thermal-insulation covers

#

For valves

#

For filters

#

For valves

#

For ball valves

#

For flanges

#

For gate valves

#

For closures

#

TM KAZCOVER INSULATION THERMAL COVERS FOR EQUIPMENT

ТМ KAZCOVER — used for equipment of complex design.

Technical properties:

• Application temperature: from - 50°С to +1000°С
• Fire hazard class: KM0 / KM1
• Application: indoor / outdoor
• Thermal conductivity from 0.034 W/ms
• Insulation thickness not less than 50 mm as calculated in accordance with SP 61.13330.2012

Physical properties:

• Water and oil resistance
• Mildew proofing
• Resistance to acids and alkalis
• Excellent thermal resistance
• Decay resistance

Heat-insulating thermal covers

for the following types of equipment

#
The simplicity of the design of removable thermal covers

Eliminates the need to involve qualified specialists for the installation of thermal insulation and maintenance of the engineering system.

TM KAZCOVER insulation thermal covers are developed directly for the task being solved.
All technical solutions are discussed and approved with the customer so that the effect obtained meets the expectations as much as possible.

Every year

Every year Our Company confirms the certificate of origin of the CT-KZ material,
with 81% Kazakhstani

Feedback