All technical solutions are discussed and approved with the customer so that the effect obtained meets the expectations as much as possible.
• Possesses low coefficient of thermal conductivity;
• High water vapor diffusion resistance coefficient;
• Increased density;
• Wide operating temperature range;
• UV resistance;
• Resistance to mechanical and chemical influences.
• Has a low coefficient of thermal conductivity;
• Able to maintain high thermal insulation properties under various operating conditions;
• Hydrophobic, means that, it has the ability not to be wetted with water;
• Withstands exposure to high temperatures without ignition and damage to the structure and strength;
• Resistant to deformation.
• Possesses excellent thermal-insulating and acoustic properties;
• High chemical resistance to water and high-pressure steam;
• Unaffected by most chemicals;
• Resistant to organic and mineral acids of any concentration;
• Resistant to sudden temperature changes (thermal shock).
• F-TEX S1 - Aluminized glass fabric.
• F-TEX S3 - Polyurethane coated glass fabric.
• F-TEX S4 - Silicone coated fiberglass fabric.
• F-TEX B1 - Textured fiberglass fabric with high temperature impregnation.
• F-TEX B2 - High temperature impregnated textured fiberglass fabric reinforced with stainless steel wire.
• F-TEX K1 - Textured silica fabric reinforced with stainless steel wire.
• Rings, half rings (stainless steel, nickel-plated);
• Hook on a leg (stainless steel);
• Tape contact (velcro);
• Kevlar thread;
• Silica thread;
• Wire (stainless steel / galvanized);
• Staples for thermal insulation (stainless steel);
• Washers (stainless steel);
• Protective mesh (stainless steel).
ТМ KAZCOVER — thermal covers for the entire list of fittings.
• Application temperature: from - 50°С to +1000°С
• Fire hazard class: KM0 / KM1
• Application: indoor / outdoor
• Thermal conductivity from 0.034 W/ms
• Insulation thickness not less than 50 mm as calculated in accordance with SP 61.13330.2012
• Water and oil resistance
• Mildew proofing
• Resistance to acids and alkalis
• Excellent thermal resistance
• Decay resistance
• Abrasion resistance
• UV resistance
• Noise and sound insulation
of thermal-insulation covers
ТМ KAZCOVER — used for equipment of complex design.
• Application temperature: from - 50°С to +1000°С
• Fire hazard class: KM0 / KM1
• Application: indoor / outdoor
• Thermal conductivity from 0.034 W/ms
• Insulation thickness not less than 50 mm as calculated in accordance with SP 61.13330.2012
• Water and oil resistance
• Mildew proofing
• Resistance to acids and alkalis
• Excellent thermal resistance
• Decay resistance